P-G2 FUEL DISPENSER

P-G2 FUEL DISPENSER

Pump Type:Optional

Inlet Pressure:>=54kPa

Flow rate (L/min.):55±5

Suction Distance (m):6(verticalmente) / 50(orizzontalmente)

FlowMeter:Type:Optional

Accuracy:±0.2%

Motor Voltage(V):110V/220V/380V,50Hz/60Hz

Capacity(hp):1HP(0.75kw)

Input Voltage:110V/220V/380V,50Hz/60Hz

Nozzle:Auto Shut-off Nozzle

Environmental Condition:-40~~+55degree

Control Type:Solenold Vale Control Type

Preset:Function Provided(Small LCDIndicator)

Display(Counter):Type:LCD and Bright Backlight

Digit of Volume:0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount:0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price:0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range:0~~99,999,999,99

Optional Display:Type:LCD and Bright Backlight

Digit of Volume:0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount:0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price:0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range:0~~99,999,999,99

Totalizer:1~~9,999,999

Hose:4.5m

Weight:215kg

Dimension(L×W×H):1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container:40ft: 44 20ft: 22

causing noise and abnormal vibration is many, either because of fuel dispenser�or exterior elements (pipe trouble). Therefore, it is first to exclude exterior reason of fuel dispenser, then in fuel dispenser terior one when overcome the above situation. After that, examine strainer and clean dirty. Next parts being checked is overflow valve. Tight spring will stick valve core and generate fuel dispenser large noise and vibration. In addition, don’t pursue large flow rate through adjusting spring extensively, since that will shorten the service life of fuel dispenser due to large system pressure. If noise is still large after the above maintenance, pump should be disassembled so as to examine vane and spring whether broken. If these parts are broken the outlet flow fluctuation of pump would be enhanced, as well as noise and vibration. The solution method is to change a new vane and spring. Leakage Leakage is divided as two categories, namely, inner leakage and outer leakage. Under the high oil pressure in hydraulic system oil is leak from high pressure area to low area, which is called inner leakage. The abrasion of vane, rotor and frame result in extensive inner leakage so as to reduce delivery volume of fuel dispenser. The outer leakage is the one oil leak from inner hyd fuel dispenser raulic system into outer, which increase unsafe environmental elements except from affecting the normal working performance of pump. To change a new oil seal when find a leakage coming from the root of pump axis. Be sure that don’t make a mistake in installing oil seal. Diagram 2-7 show the correct position ----- the labium of oil seal should face to inner chamber. In addition, tight V wheel also hurts the surface of oil seal next to pump axis so that its capacity is invalid. Diagram 2-7 The most leaking sections are the connecting face---- between pump cover and pump frame, between pump frame and vapor separator, place of cap nut of overflow valve. All of reasons are damaged seal loop or seal gasket, thus change new sealed components as soon as quickly.

arlier chapter dealing with transaction states.　　 Unlock_Transaction　　 32 CMD W(1-3) M　　 fuel dispenser (20H) To unlock a locked payable fuelling transaction in the　　 transaction buffer. This command is allowed when　　 Transaction Buffer is in state 3.〠fuel dispenser €ã€€ The transaction can only be unlocked by the CD that　　 locked it.　　 An exception to this is when a transaction is unlocked　　 using the TR_Buff_Contr_Id to unlock transactions that　　 have been previously locked by an off line CD. See　　 section 4.7 in the Communication Specification standard　　 on how to determine if a CD is off line. In this way the　　 Assign_Contr_Id is de-assigned. Unlocking a transaction　　 which has been locked by an off line CD is achieved by　　 setting the TR_Buff_Contr_Id to the same as the　　 dispensers own application subnet and node. The　　 dispenser should then reset the TR_Buff_Contr_Id to 0 0　　 and change the Trans_State to PAYABLE.　　 The TR_Buff_Contr_Id should fuel dispenser be reset to 0 0 when the　　 transaction is unlocked.　　 Please note that an Unsolicited Trans_State (Data_Id　　 100) must be transmitted as a result of this command.　　 This action must occur even if the state has not changed　　 as a result of the command.　　 PCD Comment:　　 The PCD will have to support this transaction command.　　 See the earlier chapter dealing with transaction states.　　FP31_2.22 IFSF - STANDARD FORECOURT PROTOCOL October 2005　　 DISPENSER APPLICATION　　Page: 124　　

Plenty of suitors have appeared, but the banks are staying off the dance floor IT SEEMS an unlikely bastion of patriotism, but as most bits of British business fall to foreigners, bank fuel dispenser ing remains stubbornly British. Nine of the country s top ten banks are British-owned. The exception, Abbey National, was bought in 2004 by Spain s Banco Santander Central Hispano o fuel dispenser nly after years of mismanagement. But shareholders and foreign suitors are ever-hopeful that British domination of the country s banks will soon come to an end. On December 8th shares in Barclays surged to record levels after analysts at Morgan Stanley, an investment bank, said they thought Bank of America (BofA) was interested in buying it. Ken Lewis, BofA s chairman and chief executive, later said that he would “have to have a lot of uncertainties cleared up� before making an acquisition in Europe. But British banks appear to be in play. On December 11th Prudential, a British life insurer, said it had rebuffed a Citigroup bid for its internet- banking business, Egg. And it is not only American banks that are testing the water. In July Crédit Agricole said it had looked at buying Alliance & Leicester, a former building society, and Spain s Banco Bilbao Vizcaya Arge fuel dispenser ntaria (BBVA) is thought to have pondered a bid for Lloyds TSB. The arguments for buying British banks look compelling. Britain s stable regulatory regime welcomes foreign ownership. For an American buyer, already constrained at home by rules preventing banks from making acquisitions if they have more than a tenth of national deposits, the common language and similar legal systems make Britain a good staging point for expansions into Europe. Santander s purchase of Britain s Abbey National also changed the landscape. Before that acquisition most banks had tended to focus on mergers in the same markets, where costs could be cut through closing branches. Santander, however, promised to trim almost a fifth of Abbey s costs by closing down its computer sys