K-GA44 FUEL DISPENSER

K-GA44 FUEL DISPENSER

Pump :Type Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type: Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset Function :Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose 4.5m

Weight 280kg

Dimension(L×W×H) : 1540*690*2210(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 29

ct before switching on suction pump. After oil being sucked up carefully inspect all connection and sealed sections whether exists leakage. Scrutinize the working states of measurement transducer, pump and vapor separator after starting operation. As for new filing station, clean waster and water in pipeline. Preset unit price according to oil price. It is regulative to twice PPU presetting for each fuel dispenser per day. Appraise each fuel dispenser nozzle flow rate in accordance with fuel dispenser’s metrol fuel dispenser ogical regulation and procedure, indicating value error no more than ±0.3%, repeatability error no fuel dispenser more than ±0.15%. Regulate the adjusting bolt of overflow valve to change flow rate, increasing or reducing it. It must switch off power supply to maintain failure in debugging progress. It is strictly prohibited to debug as explosion-proof junction box being open. Debug personnel should clearly tell all operating functions and methods of fuel dispensers to station staff, and make report to station owner and get authorization. Chapter VI Metrological approval of fuel dispenser As commercial measure instrument, fuel dispenser is used for calculating the volume of commercial-used fuel. Thus, its accuracy directly correlates the customer’s economical benefits. That is the reason why fuel dispenser in China should be conducted a compulsory appraisal in accordance with State’s law on metrology. Metrology aims at ensuring exactitude on basis of united unit. The metrological appraisal for fuel dispenser refers to the work that to appraise measurement performance and to inspect whether or not abiding by legal requirements. The metrological regulation on fuel dispenser JJG 443-98 (hereinafter called JJG443-98) promulgated in Aug 1, 1998, is a legal tool to appraise metering of fuel dispenser, which introduces the international metrological technology regulation and global practice. JJG 443-98 emphasized that flow meter is core component in fuel dispenser, enhances metrological requirement, increasing the cont

OSEPS ImplementationGuidelines - Revision - 20060510　　 10052006 Page 86 of 105　　 Confidential　　B.1.2 Data Encoding　　 Each data used in the messages of the IFSF Lite interface is coded using three fields:　　Coding　　 The Tag which identifies the data and its type　　Struct fuel dispenser ure　　 The Lengt fuel dispenser h which specifies the data length and is included　　 only when the length fuel dispenser of the field is not fixed. When the field length is fixed the　　 length is said to be implied　　 The Value which gives the content of the data.　　 Data Tag Length Value　　 Figure B.21: IFSF Lite Data Encoding　　B.1.3 Tag Encoding　　 Each and every element has been assigned a unique one-byte tag. This byte is an　　Tags　　 unsigned integer.　　Allocation　　 Data tag values may be found in a following section (e. g. WorkStationID data has the　　 decimal tag 142 and the hexadecimal tag 8E).　　 Values less that 32 (decimal) have not been used to avoid conflict with values that can　　Reserved　　 be used by the serial protocol as data communications control characters.　　Tags　　 The tag 255 (decimal) is reserved to allow future expansion beyond 223 tags using　　 multiple byte tags.　　IFSF POSEPS ImplementationGuidelines - Revision - 20060510　　 10052006 Page 87 of 105　　 Confidential　　B.1.4 Length Encoding　　

About sponsorship Money and interest rates Oct 5th 2006 From The Economist print edition © 2006 .  About sponsorship The Economist commodity price index Oct 5th 2006 From The Economist print edition © 2006 .  About sponsorship Sto fuel dispenser ckmarkets Oct 5th 2006 From The Economist print edition fuel dispenser © 2006 .  About fuel dispenser sponsorship Trade, exchange rates and budgets Oct 5th 2006 From The Economist print edition © 2006 .  About sponsorship Sovereign debt in default Oct 5th 2006 From The Economist print edition © 2006 .  About sponsorship Overview Oct 5th 2006 From The Economist print edition India s GDP grew by 8.9% in the year to the second quarter, faster than expected, though more slowly than the blistering pace of 9.3% set in the year to the first quarter. Its consumer prices rose by 6.3% in August. Turkey is still struggling to contain inflation. Consumer prices rose by 10.6% in the year to September, after rising by 10.3% in the year to August. In its fifth cut this year, Indonesia s central bank lowered its key interest rate by 50 basis points, to 10.75%. The country s industrial production rose by 12.2% in the year to July. Annual inflation fell for the fourth month in a row in September, though it still remains high at 14.5%. © 2006 .  About sponsorship Emerging-market investment Oct 5th 2006 From The Economist print edition After weathering a turbulent spring, emerging economies will attract a net $418 billion